Visit The Learn XRF Message Board 
     

 

Coatings and Thin Film Applications

Coating and thin film analysis is an ideal application for XRF. X-rays achieve superior penetration depths and so can measure coatings that other techniques cannot. If the coatings are predominantly one element, it makes the analysis very easy. Several common coating applications follow.

Silicone on Paper, Tissue Paper, and Hygiene products
Silicone is used as a release coating on paper, so that adhesive labels do not stick. Silicone is used on tissue paper like to make it feel softer. Silicone is also used in the liners of diapers and other hygiene products to repel moisture to keep the side next to the skin dry. EDXRF instruments have long been used for these applications. back to top

Platinum Catalyst in Silicone Resin
Platinum catalysts are used in silicone as a curing agent. It is added at concentration in the 100PPM range and can be analyzed by XRF. back to top

Phosphorus on Steel
Phosphate coatings are used to protect and pre-treat steels. They can be measured along with iron and manganese that is sometimes present. XRF is also used for monitoring the baths either by sampling it or by an on-line XRF instrument. back to top

Sulfur and Phosphorus on Aluminum
Aluminum is coated or anodized by etching the surface with an acid. Acid bonds to the aluminum making it much harder. The coating can be measured by XRF by measuring the elemental sulfur or phosphorus on the surface. Alternatively it can be measured by an x-ray absorption technique since the aluminum signal decreases with thicker anodized coatings. back to top

Aluminum on Silicon
Aluminum has long been used as the conductive layer in silicon wafers, and WDXRF is a preferred quality control instrument. back to top

Copper on Silicon
Now that many silicon wafer fabricators are switching to copper, monitoring them with XRF is easier than ever. WDXRF instruments are still used for quality control, although both WDXRF and EDXRF are usable for on-line process monitoring. back to top

Capacitors
Modern capacitors like tantalum capacitors are made by coating a thin polymer with a thin layer of metal, then the material is rolled to form the capacitor. Aluminum is the most common metal, with tantalum holding an important niche. A variety of polymers are used including polyester (Mylar), polypropylene, and polycarbonate. EDXRF instruments are ideal for monitoring the metal film thickness. The polymer thickness can also be measured using x-ray absorption techniques. back to top

Metalized Food Packaging
Many foods are packed in foil pouches made from a polymer coated with metal. The oldest is aluminized Mylar, but titanium and zinc are common, and other polymers can be used. While light transmission is used for many thing coatings, XRF instruments are suitable for most applications, particularly with thicker coatings. back to top

Solar Power Cells
Most solar cells use a thin coatings of a metal alloy on a polymer substrate. These coatings can be measured by XRF. back to top

Conductive Coatings on Plastic
In order to comply with regulations on electrical noise, modern plastic cases for electronic equipment must be shielded. Shielding is often achieved by coating the plastic with a conductive layer. In many instances this layer can be analyzed by XRF. back to top

Vapor and e-Beam Deposition Coatings
Numerous elements are deposited in thin films by e-beam or vapor deposition methods. Virtually every element above atomic number 10 can be measured by XRF. back to top